Specifications:
Model name: MCW60-R2 (Note: the MCW60 now includes the GT200 mounting plate and the G80 plate is no longer included)
Housing:
- Injection molded POM (Acetal Copolymer)
Base Plate:
- Submersed face is CNC machined from billet to form our award winning
Diamond-Pin Matrix. The design increases heat dissipation surface, and flow
turbulence to enhance heat transfer to the cooling fluid.
- The pin area is bead-blasted to guarantee a finish free of shavings
- Exceptional quality and attention to details: The base is lapped to
0.0003" (3/10 of 1/1000"), and polished to near-mirror finish to promote optimum
thermal conductivity. Users are advised that while flatness is strictly
respected for providing the most significant benefit to thermal interface,
surface polish is a cosmetic component and may vary slightly from one heatsink
to another. Re-lapping or polishing the copper base is never recommended. The
center section is raised to provide clearance for stiffening frames.
Dimensions: Overall dimensions (.pdf)
Description:
The MCW60-R2™ VGA waterblock is a next generation liquid
cooling solution for high-end graphics processors. It evolves from the award
winning MCW60-R by
receiving the same base plate technology as the Swiftech Stealth water-block: a 40% smaller Diamond Pin Matrix which improves thermal resistance from 0.01 to 0.02.
In its black and chrome trim, the MCW60-R2 VGA cooler is a
perfect match to complement either the APOGEE GTX or D-Tek FuZion v.2 CPU waterblocks.
Features:
• The thermal performance model focuses extreme cooling
where it is in fact the most needed: at the GPU level. This will afford better
overclocks, and overall lower system temperature. Efficient and silent memory
cooling is handled by using individual Ramsinks.
• The MCW60-R2 waterblock inherits all its thermal and hydraulic characteristics
from the Swiftech Stealth GPU
water-block, proven for its thermal efficiency with today's high end CPUs.
• Water-block ships with 1/2" and 3/8"
barbs in the US, and an extra pair of 1/4" fittings for Europe, guaranteeing
compatibility with any liquid cooling circuit.
• Low water-block profile allows installation with nVidia's SLI and ATI's
CrossFire™ systems.
• The NPSM thread used in the MCW60-R2 is BSPP and G 1/4 fittings compatible.
• The housing is injection molded from POM (Acetal Co-polymer) resulting in
complete reliability compared to machined Acrylic tops which tend to crack.
• All hydraulic joints (housing to cold-plate and fittings) use o-rings for
complete reliability and leak-free operations.
• The mounting system includes a strong stiffening back-plate with a soft rubber
center pad to prevent the circuit-board from bending .
• Cost of ownership is reduced by up to 50% compared to
monolithic solutions, with superior performance where it really counts, and
complete freedom in terms of graphics cards upgradability.
Compatibility:
Current Compatibilty Chart (new window)
| 
