Note: this item does not come pre-assembled... click HERE for video assembly instructions (YouTube).
Specifications (w/18W DDC-2):
Model: DDCT-01s
Top Dimensions: 67mm x 62mm x 23mm
Materiel: Black Acetal
Surface Finish: Smooth & Matte
Inlet/Outlet Thread Type: G1/4 (1/4" BSPP)
Max. Head Pressure (at 12V): 8.2 psig (18.91 feet - 5.76m)
Max. Discharge (at 12V): 4.11 GPM (246.6 GPH - 15.56 LPM/933.5 LPH)
Included Accessories: (2x) 1/2" D-Tek High-Flow fittings or 1/2" EK High-Flow fittings & (4x) 25mm Stainless Steel M4 Phillips Head screws
Specifications (w/18W DDC-3.2):
Model: DDCT-01s
Inlet/Outlet Thread Type: G1/4 (1/4" BSPP)
Max. Head Pressure (at 12V): 5.6 psig (12.92 feet - 3.94m)
Max. Discharge (at 12V): 4.19 GPM (251.4 GPH - 15.86 LPM/951.65 LPH)
Stock DDC-3.2 (18W) Specifications:
Nominal Voltage: 12 VDC
Operating Voltage range: 8 - 13.2 VDC
Minimum Starting Voltage: 9 VDC
Nominal Power (@12 V): 14-19W
Nominal Current (@12 V): 1.16-1.58 Amp
Motor Type: Electronically commutated, brushless DC, spherical motor
Maximum Head: 15 ft (4.5 m)
Maximum Discharge: ~ 120 GPH (454 LPH)
Connection Size: 3/8" barbs
Maximum Pressure: 22 PSI (1.5 BAR)
Temperature Range: Up to 140°F (60°C)
Noise Level (Swiftech's Results): 30 ~ 32 dBA in a quiet room @ 2'
Electrical Connector: 4pin Molex
Weight: 7.3 oz (207 gr.)
RPM Sensor: 3 pin connector
Stock DDC-3.1 (9W) Specifications:
Nominal Voltage: 12 VDC
Operating Voltage range: 6 - 13.2 VDC
Nominal Power (@12 V): 8.3-12 W
Nominal Current (@12 V): .69-1 Amp
Motor Type: Electronically commutated, brushless DC, spherical motor
Maximum Head: 10.8 ft (3.3 m)
Maximum Discharge: ~ 116 GPH (440 LPH)
Connection Size: 3/8" barbs
Maximum Pressure: 22 PSI (1.5 BAR)
Temperature Range: Up to 140°F (60°C)
Noise Level (Swiftech's Results): 24 ~ 26 dBA in a quiet room @ 2'
Electrical Connector: 4pin Molex
Weight: 7.3 oz (207 gr.)
RPM Sensor: 3 pin connector
Description:
That's right, they're finally here!! Introducing our very own, and very kick-ass, all Acetal, high-performance top for use with Laing DDC-series pumps! Designed in-house by our very own Petra (Alex) and machined by the spiffy guys down the street, our DDC top features an internal design which allows for maximum flowrate increase with a minimal loss of maximum head pressure (...and let's not forget all of that sexy, black Acetal  ). More performance information about our prototypes (which weren't quite as well contoured, internally, as the final production version) as well as the Radiical and Alphacool (stock & modded) tops can be found HERE. More recent, detailed performance information for the DDCT-01s on various versions of the DDC can be found HERE. Immune to galvanic corrosion, designed in the USA, manufactured in the USA, and backed by Petra'sTech... could things really get any better than that?
The DDCT-01s represents a minor revision of our original DDCT-01 design, providing compatibility with the newer, blue impellered Laing DDC-3 series of pumps that are currently available in Europe. In addition to expanded compatibility, the DDCT-01s also provides slightly improved performance, with slightly reduced power consumption.
| 
