Specifications:

Size: 240ml
ArctiClean 1 Thermal Material Remover:  ArctiClean 1 uses a proprietary combination of non-toxic biodegradable solvents to emulsify thermal greases or thermal pads. The citrus and soy based solvents in ArctiClean 1 match or exceed many hazardous and volatile solvents such as fluorinated and chlorinated organic solvents, acetone, MEK (methyl ethyl ketone), mineral spirits, isopropyl alcohol, and toluene.
ArctiClean 2 Thermal Surface Purifier:  The cationic surfactants in ArctiClean 2 remove any residue left by the ArctiClean 1 leaving a pristine surface for the application of a new thermal interface material. It also incorporates advanced flash corrosion inhibitors that minimize the corrosion layer on copper and aluminum allowing for more intimate contact between the thermal interface

Description:

The innovative minds behind Arctic Silver and Nanotherm technology have come together to bring you ArctiClean, the two step cleaning process that removes existing thermal grease or pads and prepares the thermal surface for a fresh application of thermal interface material.  Why not just use isopropyl alcohol you ask?  Isopropyl alcohol will not remove thermal pads alone and will take much wiping and scrubbing to remove the pad since it does not actually dissolve the pad itself.  However, with ArctiClean 1, thermal grease and pads are totally emulsified, thus the waxes and oils from the thermal compound are suspended allowing them to be cleaned off completely .  ArctiClean 2 will then clean up any residue left behind from ArctiClean 1 and will prepare the cooper/aluminum layer of the heatsink for maximum thermal transfer.